Featured Products
Smith’s Epoxy MAC100 is a solvent free, 2-component 100% solids Osmotic Moisture Vapor / Alkalinity Control Epoxy Primer with high capillary penetration capabilities for absorption into porous substrates at all recommended application temperatures. Epoxy MAC100 suppresses Osmotic moisture vapor transmission levels to an acceptable level (i.e. below 3 lbs. at tested rates up to 25 lbs./14 pH per ASTM F1869 or 100% RH per ASTM F2170) to receive subsequent systems.
For use as a primer prior to all common traditional flooring, cementitious overlay/underlayment and resinous floor coating interior applications.
Bonds to a variety of substrates, including but not limited to properly prepared, well bonded/sound/solid:
Concrete
Ceramic/Porcelain/Quarry Tile
Metal (i.e. Aluminum, Copper, Steel, Zinc, etc.)
Always moisture test to determine proper primer thickness necessary for conditions.
Requires a minimum CSP 3 to properly adhere to concrete with elevated moisture vapor. Diamond grinding does not exceed CSP 2 and is therefore unacceptable for moisture vapor remediation.
Smith’s Epoxy GEL-150 is a regular cure, 2-Component, 100% Solids Thixotropic Epoxy with a gel-like consistency for use vertically or horizontally for interior application. Use as a grout coat over epoxy mortar and rough texture broadcast systems, as resinous cove with the addition of Quartz, plus general purpose patching of chips, gouges, etc. Resistant to many chemicals including caustics, acids, fuels and solvents, Smith’s Epoxy GEL-150 is a user-friendly low odor, low VOC coating system. May be used to achieve an orange peel finish when applied with a paint roller. Transparent but accepts Smith’s ISC Industrial Solid Color Packs.
Smith’s Epoxy UCE201 is a decorative 100% solids epoxy used for the body coat of metallic epoxy or mixed with color Quartz aggregate as a mortar for Smith’s Epoxy HDQ-100™ decorative epoxy mortar system. This epoxy yields extended healing & flow properties when used as the epoxy body coat for Smith’s Metallic & Luster™ system to deliver optimal mottling aesthetics superior to traditional epoxy products while offering high clarity & an extended flow time on the floor. Conveniently packaged in either a 3 gallon kit with space in the Part A container for mixing all necessary components in the pail or in larger kits.
Smith’s Epoxy UCE201 is sold as a clear which accepts Smith’s Epoxy U.V. Absorber additive (OPTIONAL – sold separately) to enhance the durability & to extend the service life of the epoxy film by absorbing UVA radiation thus lessening U.V. light degradation (i.e. Yellowing, Chalking, Cracking, etc.).
Metallic body coats can be achieved by adding Smith’s Metallic & Luster (sold separately) to the Part A prior to mixing with Part B for unique metallic epoxy floors. Smith’s Epoxy UCE201 self-heals for up to 60 minutes at 72°F, making it ideal for Metallic & Luster coatings to achieve optimal mottling & a smooth finish for one-of-a-kind floors.
Solid colors can be achieved with the addition of Smith’s ISC™ Industrial Solid Color Packs (sold separately), allowing the contractor the ability to reduce waste by only pigmenting what is needed for the individual project.
Smith’s Epoxy FW38 is a fast curing 2-component, low odor, 38% solids waterborne epoxy primer and sealer for use over concrete, wood and a variety of other substrates. Smith’s Epoxy FW38 has a 1 hour pot-life and penetrates well into porous substrates at all recommended application temperatures allowing subsequent layers to be applied in a few hours. May be applied via roller, brush or HVLP sprayer.
Smith’s Epoxy VCB38 is a 2-component, low odor, low VOC, fast-curing waterborne epoxy used specifically as a base coat for full broadcast Vinyl Chip systems in residential, retail and commercial environments.
Smith’s Epoxy VCB38 achieves a tenacious bond at all recommended application temperatures and cures quickly, allowing for the excess, loose chips to be removed within a few hours with subsequent layers immediately following.
May also be used as a vertical base coat on concrete or CMU walls as well as an alkalinity & moisture vapor reduction primer with readings <5% MC (per ASTM F2659), <15 lbs. (per ASTM F1869) or <95% RH (per ASTM F2170) with 9 to 12 pH when applied at 10 to 12 mils (WFT) over properly mechanically prepared concrete.
RECOMMENDED USES:
As a Base Coat for Full Broadcast Vinyl Chip over properly prepared, sound & solid:
Concrete & Lightweight Concrete
Wood (APA Exterior or Marine grade after priming with Smith’s Epoxy FW38)
Appropriate for Light Commercial & Residential Interior Full Broadcast Vinyl Chip floors
As a primer as part of a residential, retail or commercial coating system to include moisture vapor transmission & alkalinity reduction within the published tolerances in the product data sheet